Dallmeier Logo

Panomera® S8 Ultraline

Main Features

  • Multifocal system with 8 sensors
  • Effective resolution up to 190 megapixels
  • Recognition distance up to 160 m
  • Horizontal field of view up to 75°
  • Frame rate 30 fps at full resolution
  • Day/Night switching with ICR
  • Panomera® S8 190/30 DN
  • Panomera® S8 184/45 DN
  • Panomera® S8 78/75 DN

The patented Panomera® Multifocal Sensor System is a completely new camera technology particularly developed for the extensive video surveillance of large scale areas. Enormous expanses and areas are captured in a completely new resolution quality in real time. This results in significantly lower infrastructure requirements. Where previously several megapixel cameras would have been necessary, a single Panomera® Multifocal Sensor System is now sufficient.

Panomera® effect
The sophisticated combination of the high-resolution sensors of Panomera® S8 Ultraline offers an excellent dynamic range of 130 dB UWDR effectively and results in an extreme Panomera® effect. It offers a resolution of more than 125 px/m up to a distance of 160, 104 or 82 m, which enables the recognition of persons over the entire distance. The identification of persons (250 px/m) is supported up to a distance of 46 m depending on the model, observation (62 px/m) even up to a distance of 322 m. This corresponds to an immense object space of more than 26,000 sqm with consistent depth of field.

Automatic calibration
The innovative lens sensor concept of the Panomera® S8 is based on motorized varifocal lenses that are optimally matched to the extremely high-resolution image sensors. The individual lens sensor units are automatically focused and calibrated over the network using the Panomera® AutoCalibration software. It is not necessary to focus and calibrate directly at the Panomera® installation site.

Video Content Analysis
The optional Video Content Analysis (VCA) detects movements and objects in the uncompressed image and analyzes them in real-time (depending on the analysis resolution) with highly developed analysis functions such as Intrusion Detection or Line Crossing. The detected events can be used to trigger the recording of a SMAVIA recording system. Together with the detected objects and the corresponding metadata, they are stored in a database. This allows the targeted search and evaluation of the recordings by SMAVIA Viewing Client with the SmartFinder function.

Permanent capturing
The multifocal sensor system captures and stores all areas of the object space in maximum detail resolution. It does not matter whether the operators in live mode concentrate on a certain area (multiple detail zoom) or whether interesting areas are displayed in detail on the basis of video content analysis (multiple auto tracking). The Panomera® recordings always contain the entire action and allow for the evaluation of each incident.

Automatic switching
The individual sensors of the Panomera® S8 are equipped with an ambient light sensor and a removable IR cut filter and can automatically switch between day and night mode. In addition, different day and night presets can be defined and adjusted for the exposure settings.

EdgeStorage
The sensors of the Panomera® S8 are equipped with a RAM memory that is used by the EdgeStorage function to store the video stream in case of a network failure (e. g. Spanning Tree, Bursts). When the network is restored, the SmartBackfill function ensures fast transmission to the SMAVIA recording system. This stores the video stream with high speed and then continues to record the live stream seamlessly.

  • Multifocal sensor system with 8 sensors
  • Effective resolution 190, 184 or 78 megapixels (MPe)
  • Horizontal field of view 30°, 45° or 75°
  • Very good light sensitivity <0.05 lux
  • 3D Digital Noise Reduction (3D-DNR)
  • Hiding of protected areas (Privacy Zone Masking)
  • Weather-proof (IP66) housing with integrated heater
  • Housing coating tested for seawater resistance
  • Variants with copper or fiber optic connection

Power Supply Unit 48 V DC, 5 A (for EN 50022 DIN-Rails)
Power supply for Panomera®, 48 V DC, 5 A, suitable for DIN rails according to EN 50022


    Panomera® S4 – S8 Wall Mount Set

    WBOVA2 – Wall Mount Bracket
    Wall mount bracket WBOVA2 with integrated joint, compatible with Panomera® S4 – S8

    WCPA – Support Plate Adapter
    Reinforcing support plate WCPA for adapting the wall brackets WBMA and WBOVA2


    Panomera® S4 – S8 Corner Mount Set

    WBOVA2 – Wall Mount Bracket
    Wall mount bracket WBOVA2 with integrated joint, compatible with Panomera® S4 – S8

    WCWA – Corner Mount Adapter
    Corner mount adapter WCWA for corner mounting


    Panomera® S4 – S8 Ceiling Mount Set

    WFWCA – Ceiling Mount Bracket
    Ceiling mount bracket WFWCA with integrated joint, compatible with Panomera® S4 – S8


    Panomera® S4 – S8 Pole Mount Set (65 – 110 mm)

    WBOVA2 – Wall Mount Bracket
    Wall mount bracket WBOVA2 with integrated joint, compatible with Panomera® S4 – S8

    WSFPA – Pole Mount Adapter
    Pole mount adapter WSFPA for pole diameters 65 – 110 mm (2.6 – 4.3")


    Panomera® S4 – S8 Pole Mount Set (210 – 225 mm)

    WBOVA2 – Wall Mount Bracket
    Wall mount bracket WBOVA2 with integrated joint, compatible with Panomera® S4 – S8

    WCPA – Support Plate Adapter
    Reinforcing support plate WCPA for adapting the wall brackets WBMA and WBOVA2

    DBHWGC – Pole Mount Adapter
    Pole mount adapter DBHWGC for pole diameters 210 – 225 mm (8.3 – 8.6")