Dallmeier Logo

DF5400HD-DN/IR

Main Features

  • Ultra HD Camera
  • Day/Night with ICR
  • Integrated IR Illumination
  • Motor-driven Lens
  • One-Push Autofocus
  • P-Iris Control
  • PoE (Class 0)
  • Outdoor Wall Mount Bracket

The DF5400HD-DN/IR has been designed especially for applications requiring images with highest resolution in real-time at day and in the IR mode at night. Built into an IP66-rated weather-proof enclosure, the camera is designed for both indoor and for outdoor applications. The camera is operated with Power over Ethernet (PoE Class 0, IEEE 802.3af) which allows for an easy, quick and cost-effective cabling and commissioning.

Ultra HD resolution
The high resolution of the sensor and the sophisticated image processing enable real-time recordings with UHD resolution at a frame rate up to 25/30 fps (2160p/30) with excellent quality. Thus, the camera is ideally suited when capturing the finest detail is required in real time.

Automatic switching of presets
The camera is equipped with an ambient light sensor and a removable IR cut filter and can automatically switch between day and night mode. In addition, different day and night presets for the exposure settings can be defined and adjusted.

Integrated homogeneous IR illumination
The automatic Day/Night operation is supported by a uniform IR illumination by means of semi-covert 850 nm high power LEDs. In the IR mode at night, the camera provides excellent results due to the high infrared sensitivity and thus meets the most demanding requirements in a 24-hour operation.

Motor-driven varifocal lens with P-Iris
The camera has a motor-driven megapixel varifocal lens that is perfectly tuned to the image sensor. The adjustment of zoom, focus and iris is made conveniently using a web browser. The manual lens setting directly at the installation site of the camera is not required. The lens is equipped with a P-Iris control providing a precise and automatic adjustment of the optimum aperture. Thus, the camera achieves a much better depth of field than with conventional DC auto iris lenses under almost any lighting conditions.

Digital Image Shift
The Digital Image Shift function allows a comfortable fine adjustment of the captured image section via a web browser ensuring a quick and easy installation of the camera. Depending on the selected resolution, the used area on the image sensor can be moved and adapted to the local conditions. The manual fine alignment of the camera directly at the installation site is not necessary.

EdgeStorage
The camera is equipped with a RAM memory that is used by the EdgeStorage function for storing the video stream in case of a network failure. When the network is restored, the SmartBackfill function ensures a fast transmission to the SMAVIA recording system. This stores the video stream with high speed and then continues the recording of the live stream seamlessly.

  • 1/1.7'' Ultra HD CMOS image sensor
  • Adjustable IR intensity and Day/Night switching threshold level
  • Minimum illumination 0 lux (with IR LED On)
  • Memory expansion with microSDHC card
  • Gigabit Ethernet interface
  • Video compression H.264, MJPEG
  • Simultaneous Dual-, Tri- or Quad Streaming
  • Privacy Zone Masking
  • Digital flip function
  • Wide Dynamic Range (WDR)
  • 3D Digital Noise Reduction (3D DNR)
  • EdgeStorage for Emergency Recording with SmartBackfill
  • Outdoor wall mount bracket (with internal cable routing)

PoE Midspan 30 W
Midspan power supply unit, 1× Ethernet port, 10/100/1000Base-T,
802.3at, 802.3af, 30 W


Wall Mount

WCPA – Support Plate Adapter
Reinforcing support plate WCPA for adapting the wall brackets WBMA, WBOVA2 and IR housing wall mount bracket


Corner Mount

WCWA – Corner Mount Adapter
Corner mount adapter WCWA for corner mounting


Pole Mount

WSFPA – Pole Mount Adapter
Pole mount adapter WSFPA for pole diameters 65 – 110 mm (2.6 – 4.3")


Pole Mount

WCPA – Support Plate Adapter
Reinforcing support plate WCPA for adapting the wall brackets WBMA, WBOVA2 and IR housing wall mount bracket

DBHWGC – Pole Mount Adapter
Pole mount adapter DBHWGC for pole diameters 210 – 225 mm (8.3 – 8.6")