Panomera® Models

Which Panomera® will be yours?

Various Panomera® models are available depending on the application area: Whether they are intended to cover large areas, broad expanses, long distances or smaller, complex coverage areas. pecial systems have also been developed specifically for stadiums or airport runways, for example.

Did you know? Panomera systems can also be easily integrated into video management systems from other manufacturers.

Panomera® Perimeter

Panomera® Perimeter

Designed for AI based perimeter protection

Panomera® S4/8 Area

Panomera® S4/8 Area

Acquisition of huge areas with consistent depth of field

Panomera® S8 Runway

Panomera® S8 Runway

The complete runway in a high resolution overview

Panomera® S4/8 Stadium

Panomera® S4/8 Stadium

Efficient acquisition of very distant areas

Panomera® W4/8 Area

Panomera® W4/8 Area

Optimised for the acquisition of a complete half-space

Panomera® Extensions

Panomera® Extensions

Smart extensions with remote control over the network

Panomera® Perimeter Praxisleitfaden

Panomera® Perimeter

 

The unique combination of
dedicated perimeter AI and superior optics

The Panomera® S – Unlike all the others

The patented Panomera® technology combines several lenses and sensors with different focal lengths in one optical unit. Thus, Panomera® cameras with “multifocal sensor technology” also capture rear and middle image areas with the same high resolution as scenes in the foreground. With unique advantages in video surveillance, video monitoring and video analysis.

The Panomera® S – a new dimension in video observation and video surveillance

Panomera® works like a virtual combination of any number of PTZ cameras and several megapixel cameras. This allows users to capture large areas or long distances with a fraction of the cameras that would otherwise be required – while maintaining the same image quality over the entire object space. This results in cost savings, increased efficiency and improved objective security – with benefits for everyone involved: from the planner and installer to the system operator, the security manager and the commercial decision-maker.

Everything
in Focus
8 x

24 x
fewer camera systems

3.000 m2
per camera with video surveillance at > 250 px/m (Identify)

90 %
less infrastructure

12.000 m2
per camera with video surveillance at > 125 px/m (Recognise)

The Panomera® S – video analysis grows up

Especially in video analysis, Panomera® shows its strengths: The image and thus the data quality can be planned exactly for the respective analysis requirements and is of exactly plannable minimum quality over the entire area. Users capture data over an extremely large area with a minimum amount of cameras. Panomera® thus enables the precise analysis of even extremely complex and large spatial context.

8x
AI
Power

70 Tops
combined AI Power

100 %
plannable data quality

24 x
more analysis space

51.000 m2
per camera with video analysis at > 62,5 px/m

Made in Germany – for many years to come

The Panomera® is developed and manufactured 100% at the Dallmeier site in Regensburg. Thus we have the complete supply and development chain in our hands and guarantee the highest standards in cybersecurity and data protection. Only high-quality components and materials are used. Together with the retrofittability of the systems and high energy efficiency, this ensures economical and sustainable operation – far beyond the typical life cycles.

Innovative functions in perfect form – modest but dynamic

Multifocal sensor technology is the most intelligent use of a very valuable resource: Image resolution

Superior in analytics and video surveillance

Everything in Focus

Best overview, any number of “virtual PTZs”, consistently high image quality

Reduced TCO

Up to 24 x fewer cameras, 90% less infrastructure

Optimised Video Analytics

Plannable and precise data quality for optimal analysis results

How does Panomera® S help your company?

With Panomera®, we achieve optimal control with minimal operator workload and low total cost of ownership due to fewer systems required.

Thorsten Wünschmann,
Head of Public Order Office, City of Hanau (Germany)

With Panomera® technology, distant objects can be captured with the same quality as those in the foreground. The extremely high resolution throughout the entire area and intuitive operation of the system led us to choose Dallmeier.

Giuseppe Musto,
Head of Innovation & Automation Development, GESAC, Naples International Airport

Overall, the Panomera® cameras enabled us to significantly increase our stadium security and greatly reduce the number of incidents.

Dave Lewis,
Head of Security and Stadium Safety, Everton FC

Panomera® Technology

Sensor System

Multifocal means lower cost and better control.

In contrast to single sensor cameras, the MFS technology works with several sensors (multisensor), each operating with different focal lengths (multifocal). That way, a  huge area can be surveyed in exceptional detail with very few Panomera® systems.

In addition to a vastly improved overview and better control of any large spatial context, Panomera® helps customers to significantly reduce infrastructure and operating cost.

Multifocal Sensor System

  • Use of lenses with different focal lengths
  • “Staggering” of the scene
  • High dynamic
  • Consistent focal depth
  • Optimal focal length for each area
  • Uniform resolution grid over the entire object space

Interactive Simulator

See the difference: Multifocal sensor technology Panomera® vs. conventional camera technologies

Resolution

It's not just megapixels...

... but about minimum resolution density (MDR). The minimum resolution density according to the global standard DIN EN 62676-4 is defined as “pixel per metre” (px/m).

For accurate analysis results and court usability, it is not the resolution of a camera that is decisive, but how many pixels per meter are achieved in which image areas.

Panomera® can display distant objects with the same resolution as objects in the foreground and the minimum resolution density can be planned precisely in each area. This allows a uniform minimum resolution density to be achieved over the entire surface (or section).

 

Minimum resolution density (MDR) as in DIN EN 62676-4

  • Observe: 65 px/m
  • Recognise known persons: 125 px/m
  • Identify unknown individuals: 250 px/m

These values must be met, no matter how far away a particular person or object may be.

Interactive Simulator

See the difference: Multifocal sensor technology Panomera® vs. conventional camera technologies

Image Breakdown

Get the most of your image.

Real scenes seldom correspond exactly to the 16:9 or 4:3 format – this leads to waste of recording and storage capacities. With Panomera®, the aspect ratio can be adapted individually.

Benefits

  • Formats such as 11:5, 1:1 or 8:1 are possible
  • Perfect adjustment for any field of application

Interactive Simulator

See the difference: Multifocal sensor technology Panomera® vs. conventional camera technologies

Dynamic Range

Brighten Up.

Panomera® works with several sensors, each of which selects its own exposure strategy in order to achieve ideal saturation. While with other cameras an average value is determined, Panomera® exposes bright areas shorter and dark areas longer.

Benefits

  • Optimum quality even in situations with high dynamic range
  • No overexposures or “washed out” areas

Interactive Simulator

See the difference: Multifocal sensor technology Panomera® vs. conventional camera technologies

Panomera® Benefits

This is Panomera®

The revolution in video surveillance.

The multifocal sensor system Panomera® was specially developed for the all-encompassing surveillance of expansive areas. With Panomera®, enormous widths and also areas with large distances are displayed in a completely new resolution quality. Depending on the customer’s needs, the resolution can be scaled nearly limitlessly.

Benefits

  • Significantly fewer cameras and less complexity
  • Much larger coverage areas – same number of screens
  • Reduced workload for operators
  • Improved attainment of security objectives
  • Precisely definable resolution over the entire area
  • S systems for long distances or large areas / expanses
  • W systems for 180° or 360° panoramic views
  • Realtime display also at high frame rates of up to 30 fps

Interactive Simulator

See the difference: Multifocal sensor technology Panomera® vs. conventional camera technologies

Panomera® effect

Minimise Your Total Cost of Ownership.

Thanks to the Panomera® effect, large areas or even long distances (e.g. at the perimeter) can be captured with considerably fewer cameras than with the use of traditional single-sensor cameras.

In addition, the minimum resolution density can be precisely defined already in the planning phase. This is the only way to ensure uniform minimum image quality and so ensure consistent data quality for court usability and analytics. 

The smaller number of cameras also significantly reduces infrastructure requirements (masts, cables, power, etc.) as well as labour for installation, operations, maintenance and service.

Benefits

  • Significantly less cameras & screens
  • Several times greater area coverage with same personnel
  • Substantially reduced workload for operators
  • Better attainment of security objectives
  • Much lower total cost of ownership

Interactive Simulator

See the difference: Multifocal sensor technology Panomera® vs. conventional camera technologies

Easy to use

Keep calm and use Panomera®.

Unlike PTZ cameras, which can only ever be operated by one person at a time, with Panomera® any number of operators can traverse the entire scene without regard for each other. So even though all operators are connected to the same camera, each of them can select a preferred view of interest and zoom or pan within the view at will.

Benefits

  • Simple operation, good usability
  • Intuitive navigation in one contiguous image
  • No switching between cameras needed
  • Permanent overview of the entire scene
  • Freely selectable zoom areas
  • Seamless search function in the entire image
  • Simultaneous live feed and playback: The same scene can be viewed in both Live and Playback mode at the same time

Multi-user and Multicast

Everybody's First.

In contrast to single-sensor cameras, with which only one operator can control the camera, with Panomera®, an unlimited number of operators can navigate across the entire scene independently of each other. 

Benefits

  • Multiple operators can open detail views in an overall context independently of each other
  • The multicast capability allows recorded material to be reviewed by several users at the same time

Further Information

Interactive Simulator

See the difference: Multifocal sensor technology Panomera® vs. conventional camera technologies

Awards